| Tier | Signal | Date | Service Impact |
|---|---|---|---|
| Tier 2 |
Implemented 'wet shoe' liner configuration with intentional over-displacement for toe initiation, avoiding wireline perforating. ๐ Completion & Perforation Details Non-standard liner setup optimizes frac operations, reducing complexity and cost compared to traditional methods. |
Relative | Completions / Frac |
| Tier 3 |
Utilized Starsteer software for wellbore steering with 12-foot target window in Middle Bakken, achieving 100% exposure to ideal target. ๐ Geological Summary - Horizontal Wellbore Specific software choice for precise targeting implies advanced geosteering capabilities, beyond basic MWD. |
2025-10-18 | General Oilfield Services |
| Tier 3 |
Drilling paused for TOOH at 10,804' MD due to low build rates, resuming after 3 hours, with landing target adjusted downward at Lodgepole marker.โฐ TIME-SENSITIVE ๐ Geological Summary - Curve Section Operational adjustment mid-curve suggests real-time steering challenges, not pre-planned, potentially impacting timeline and costs. |
2025-10-16 | Directional Drilling |
| Tier 3 |
Well spudded on a five-well pad, with specific pad construction using existing materials and scoria surfacing, including indirect heater exemption. ๐ Permit Application and Facility Statement Pad design emphasizes efficiency and environmental compliance, with multi-well setup indicating batch development intent. |
2025-09-14 | General Oilfield Services |
| Tier 3 |
Operator requested and received waiver for open hole logs, citing sufficient offset well data within 1 mile, allowing GR-CBL run from TD to surface instead. ๐ Sundry Notice for Open Hole Log Waiver Non-standard logging approach deviates from typical NDIC requirements, potentially reducing costs and accelerating operations by leveraging offset data. |
2025-05-20 | Regulatory / Permitting |
| Tier 3 |
Anti-collision report shows minimum separation factors as low as 1.913 with adjacent wells, using Chord guidance and gamma ray signatures. ๐ Anti-Collision Report Tight spacing on pad requires precise collision avoidance, indicating high-density development strategy. |
2023-10-11 | Directional Drilling |