| Tier | Signal | Date | Service Impact |
|---|---|---|---|
| Tier 3 |
Major lateral trajectory shift: KOP moved 721' east, 7" casing point/lateral/BHL shifted ~860' east from original plan. ๐ Permit Modification 'PROPOSED WORK' section, page 7 of 10, dated 9/1/2026 This is a substantial redesign of the well path, not a minor adjustment. It requires new anti-collision analysis, survey planning, and likely changes to geosteering targets. |
2026-09-01 | Directional Drilling |
| Tier 3 |
Operator secured approval to waive open-hole porosity/resistivity logs, relying on data from offset well Bock 3624-1BH. ๐ Sundry Notice Form, 'DESCRIPTION (OPERATOR)' section, dated 07/07/2026 This is a non-routine regulatory approval that reduces standard data acquisition costs. It indicates the operator is confident in subsurface correlation from a nearby well. |
2026-07-07 | General Oilfield Services |
| Tier 3 |
Operator formally requested a waiver from the mandatory 3-business-day waiting period before commencing operations after permit approval.โฐ TIME-SENSITIVE ๐ Affidavit letter dated September 11, 2025 Waiving the waiting period shows intent to begin construction and drilling immediately upon permit approval, indicating urgency and compressed timeline for pad development. |
2025-09-11 | Regulatory / Permitting |
| Tier 3 |
Plans to cement the 4-1/2" production liner using a 'wet shoe with the ability to frac out the toe'. ๐ Drilling Plan, 'Completion Program' section A 'wet shoe' completion is a specific technique that influences cementing design, stage isolation, and initial fracture initiation, differing from standard cemented liner or plug-and-perf designs. |
Relative | Completions / Frac |
| Tier 3 |
MWD Contractor is pre-selected as 'KLX Directional' in the drilling plan. ๐ Drilling Plan, '1. Estimated Formation Tops' section The directional/MWD vendor is explicitly named in the well plan, indicating a declared service contractor ahead of spud. This is a direct signal of awarded or intended work. |
Relative | Directional Drilling |