🛢️ C FERRARI 1 SWD

Phoenix Operating LLC · Williams County, ND · File #42402 · Generated 2026-08-22 01:11

API: 3310506721
Target Formation: Dakota Group, Inyan Kara Fm.
Confidence: High

📊 Signals (4)

Tier	Signal	Date	Service Impact
Tier 3	Drone survey performed for as-built pad containment volume calculation (April 27, 2026), used for regulatory submission rather than traditional survey. 📄 As-Built Plat Package Notes Adoption of advanced surveying technology for regulatory compliance, indicating preference for 3D modeling and efficiency.	2026-04-27	General Oilfield Services
Tier 3	Immediate SCADA/automated alarm system implementation with ESDV (Emergency Shut Down Valve) integration required as permit stipulation, not typical post-construction upgrade. 📄 UIC Permit Stipulations (Page 2 of 10) and Sundry Form ID 308133 Regulator-mandated real-time monitoring and automated shutdown from project start, indicating high-risk or high-volume site.	2025-10-14	General Oilfield Services
Tier 3	Regulator-approved tank diking variance contingent on submission of as-built schematic, indicating negotiated flexibility on containment standards. 📄 UIC Permit Stipulations (Page 3 of 10) Regulatory accommodation for pad design, suggesting operator influence and non-standard containment approach requiring specific as-built verification.	2025-10-14	General Oilfield Services
Tier 3	Rapid sequence of MAIP (Maximum Allowable Injection Pressure) increase requests from 1362 psi → 1787 psi → 1953 psi within a two-week period (April 2026), indicating urgent operational scaling or pressure optimization.⏰ TIME-SENSITIVE 📄 Multiple Sundry Forms (Form IDs: 307799, 308133, 308263) Shows operator aggressively pushing injection capacity limits shortly after well commissioning. Reveals dynamic pressure management and potential need for higher throughput.	Relative	General Oilfield Services

💡 Operator Intent

Develop integrated pad with SWD well co-located with six producer wells to handle full pad produced water volumes internally, eliminating third-party disposal dependence.

UIC Plan states 'The proposed well is to be utilized by wells drilled from the same well pad' and 'No truck unloading is currently planned.' As-built shows SWD well amidst six producer wells.
Aggressively optimize injection well performance through sequential pressure increase requests to maximize disposal capacity and operational flexibility.

Three MAIP increase requests filed within two weeks of first injection (April 2026), referencing Hazen-Williams calculations and SCADA monitoring as justification.
Implement advanced monitoring and containment from project inception to secure regulatory approval for high-volume disposal facility.

Permit stipulations require immediate SCADA/ESDV implementation, and operator highlights 24-hour remote monitoring, alarm systems, and SPCC plans in rate increase justification.

🔧 Service Operator Relevance

Pressure Management & Pump Services

Operator is actively testing and increasing MAIP limits (1362→1953 psi). Requires pump optimization, pressure testing, and system calibration to support higher injection rates.

SCADA/Instrumentation Maintenance

Regulator-mandated SCADA with ESDV alarms requires ongoing calibration, monitoring, and potential expansion as injection parameters change.

Containment Surveying & Certification

Tank diking variance contingent on as-built schematic submission creates immediate need for surveying and volume certification post-construction.

Pipeline Integrity Testing

High-pressure injection line (2000 psi test) and ongoing pressure increases necessitate regular integrity testing and maintenance.