🛢️ GO-Daniel-156-98-0322H-3

Hess Bakken Investments II, LLC · Williams County, ND · File #42860 · Generated 2026-04-29 02:35

API: 3310506823
Target Formation: Middle Bakken
Confidence: High

📊 Signals (6)

Tier	Signal	Date	Service Impact
Tier 2	Casing program includes wet shoe sub for intentional over-displacement and plug-and-perf completion method. 📄 Casing and Cement Program Non-routine completion technique allowing frac-out through shoe and subsequent plug-and-perf stages.	Relative	Completions / Frac
Tier 3	Permit approved with conditions including contact to NDIC Field Inspector prior to pad expansion and specific setback requirements.⏰ TIME-SENSITIVE 📄 Permit Approval Requires pre-spud coordination, indicating urgency in regulatory compliance for pad development.	2026-04-24	General Oilfield Services
Tier 3	Permit application submitted with specific anti-collision precautions including real-time corrected surveys, gamma ray geo-steering, and surveys every 93'-100' with frequency increases as needed. 📄 Permit application and anti-collision report Indicates proactive risk management for wellbore collision avoidance in a densely drilled area, beyond standard permit requirements.	2026-04-21	Directional Drilling
Tier 3	Affidavit confirming Halliburton Energy Services does not use specified diesel fuels in hydraulic fracturing, covering all Hess Bakken wells. 📄 Hydraulic Fracturing Diesel Fuels Affidavit Demonstrates compliance with February 12, 2014 memo and pre-selects Halliburton as stimulation provider, avoiding regulatory penalties.	2026-04-21	Completions / Frac
Tier 3	Drilling prognosis specifies Nabors X27 rig, closed mud system, remote/automatic shutoff devices, and specific mud program with oil base mud from 2,250ft to 11,141ft. 📄 Drilling Prognosis Details non-standard mud system and rig selection, indicating environmental and operational preferences.	Relative	Mud / Fluids
Tier 3	Pressure control equipment specifies Cameron Annular Preventer, MI-SWACO Remote Operated Hydraulic Choke, and Shaffer Pipe Ram. 📄 Pressure Control Equipment Pre-selection of specific BOP components indicates vendor ecosystem preference for high-reliability equipment.	Relative	General Oilfield Services

💡 Operator Intent

Minimize environmental impact through closed mud system, remote shutoff devices, and specific mud disposal to approved facilities.

Permit stipulations require closed mud system, no cuttings pit, and cuttings hauled to state-approved facility.
Ensure regulatory compliance and avoid penalties by adhering to hydraulic fracture notice requirements and diesel fuel restrictions.

Operator acknowledges hydraulic fracture notice to adjacent operators and provides diesel fuels affidavit.
Prioritize safety and operational efficiency with specific anti-collision measures and equipment selections.

Detailed anti-collision report and specification of high-reliability BOP components.

🔧 Service Operator Relevance

Directional Drilling and Anti-Collision Services

Permit approved April 24, 2026, with spud notification required within 3 business days; signals immediate need for real-time surveying and geo-steering.

Completion and Stimulation Services

Post-drilling, with plug-and-perf method and Halliburton stimulation; timing tied to drilling completion.

Pressure Control and Rig Services

Rig mobilization with Nabors X27 and BOP setup required prior to spud.