BR-WANDA JUNE 1-13H MB - Intelligence Brief

MUREX PETROLEUM CORPORATION · Divide County, ND · File #43380 · Generated 2026-10-08 04:45

📊 Signals (5)

Tier	Signal	Date	Service Impact
Tier 2	Approval includes condition due to a production liner cemented in the lateral with a wet shoe and no ability to frac out the shoe. 📄 Drilling Program - Wet Shoe Schematic The permit stipulation is directly tied to a specific, non-standard completion design (wet shoe), affecting cementing and stimulation plans.	2026-10-06	Completions / Frac
Tier 3	Well must be drilled back-to-back with the BR-Micah Andrew 1-13H MB well to justify the spacing unit.⏰ TIME-SENSITIVE 📄 Permit Stipulations Regulatory condition creates a firm, sequential drilling schedule, not just a permit. This locks in rig and service timing.	2026-10-06	Drilling Rigs
Tier 3	Murex must contact NDIC Field Inspector Marc Binns at 701-770-2564 prior to location construction.⏰ TIME-SENSITIVE 📄 Permit Stipulations A direct, personal contact requirement for a specific inspector is a non-routine condition that must be fulfilled before pad construction can begin.	2026-10-06	General Oilfield Services
Tier 3	Murex has elected to adjust the original drilling program. Rather than drill 5 wells in each DSU on separate pads and separate drilling programs, Murex has elected to drill all of the wells from the same pad. 📄 Drilling Plan Statement Demonstrates a significant change in development strategy, consolidating pads which impacts earthwork, pad construction, and logistics.	2026-10-02	Drilling Rigs
Tier 3	Rig: H&P 515 is specified in the directional plan.⏰ TIME-SENSITIVE 📄 Drilling Program - Directional Plan The rig is explicitly named in the directional plan dated before the permit approval, showing advanced operational planning.	2026-09-14	Directional Drilling

Tier

Signal

Date

Service Impact

Tier 2

Approval includes condition due to a production liner cemented in the lateral with a wet shoe and no ability to frac out the shoe.
📄 Drilling Program - Wet Shoe Schematic
The permit stipulation is directly tied to a specific, non-standard completion design (wet shoe), affecting cementing and stimulation plans.

2026-10-06

Completions / Frac

Tier 3

Well must be drilled back-to-back with the BR-Micah Andrew 1-13H MB well to justify the spacing unit.⏰ TIME-SENSITIVE
📄 Permit Stipulations
Regulatory condition creates a firm, sequential drilling schedule, not just a permit. This locks in rig and service timing.

2026-10-06

Drilling Rigs

Tier 3

Murex must contact NDIC Field Inspector Marc Binns at 701-770-2564 prior to location construction.⏰ TIME-SENSITIVE
📄 Permit Stipulations
A direct, personal contact requirement for a specific inspector is a non-routine condition that must be fulfilled before pad construction can begin.

2026-10-06

General Oilfield Services

Tier 3

Murex has elected to adjust the original drilling program. Rather than drill 5 wells in each DSU on separate pads and separate drilling programs, Murex has elected to drill all of the wells from the same pad.
📄 Drilling Plan Statement
Demonstrates a significant change in development strategy, consolidating pads which impacts earthwork, pad construction, and logistics.

2026-10-02

Drilling Rigs

Tier 3

Rig: H&P 515 is specified in the directional plan.⏰ TIME-SENSITIVE
📄 Drilling Program - Directional Plan
The rig is explicitly named in the directional plan dated before the permit approval, showing advanced operational planning.

2026-09-14

Directional Drilling

💡 Operator Intent

To drill four wells back-to-back from a single pad to reduce waste and operational footprint.

Murex has elected to drill all of the wells from the same pad but in two different programs. Drilling from the same pad will reduce waste. All wells listed above will be drilled back to back.

To utilize a cemented liner with a 'wet shoe' completion design to enable wireline plug-and-perf operations.

The wellbore design configuration for this well is a cemented liner with a 'wet shoe', where the cement job of the liner is over displaced with 3 bbl of displacement fluid, creating approximately 100' of uncemented annulus around the toe.

🔧 Service Operator Relevance

Drilling & Directional Services

Rig H&P 515 is pre-selected and the well must be drilled back-to-back with another, creating a firm, immediate sequence of work.

Cementing

The approved well design features a cemented liner with a 'wet shoe', requiring precise cementing services for both the intermediate casing and production liner.

Earthwork & Pad Construction

The operator consolidated a multi-well program onto a single pad, requiring pad construction and earthwork to accommodate four wells back-to-back.

Surveying

A specific surveying contractor (4 Dimension Surveying & Consulting) prepared the well location plat, indicating a pre-existing relationship for pad and well path planning.

🛢️ BR-WANDA JUNE 1-13H MB

📊 Signals (5)

💡 Operator Intent

🔧 Service Operator Relevance