โ† Back to Daily Permits

๐Ÿ›ข๏ธ FURY 2-1-6-5F 1H

DEVON ENERGY WILLISTON, L.L.C. ยท Williams County, ND ยท File #43389 ยท Generated 2026-10-12 07:03

API
3310506910
Target Formation
BAKKEN
Confidence
High

๐Ÿ“Š Signals (4)

Tier Signal Date Service Impact
Tier 2 Permit approval is conditioned on a production liner cemented in the lateral with a wet shoe and the ability to frac out the shoe to satisfy east boundary setback.
๐Ÿ“„ Page 1, 'The east setback is based on a production liner cemented in the lateral with a wet shoe and the ability to frac out the shoe.'
Specific, non-standard completion design (wet shoe for fracing out) is mandated by the regulator to meet spacing requirements.
2026-10-08 Completions / Frac
Tier 3 BLM notification required for federal minerals within the spacing unit, per email from NDIC engineer.โฐ TIME-SENSITIVE
๐Ÿ“„ Email from Nathaniel Erbele: 'It appears that the below captioned permit applications are within a spacing unit that may be subject to a Federal permit. Please contact the BLM office...'
Introduces a federal agency coordination step (BLM) that the operator must complete, adding complexity and potential delay.
2026-10-08 General Oilfield Services
Tier 3 Operator must contact NDIC Field Inspector Jessica Gilkey prior to location construction, adding a regulatory checkpoint.โฐ TIME-SENSITIVE
๐Ÿ“„ Page 1, 'Devon must contact NDIC Field Inspector Jessica Gilkey at 701-770-7340 prior to location construction.'
Adds a mandatory pre-construction regulatory contact, creating a potential timing gate for pad construction.
Relative General Oilfield Services
Tier 3 Permit includes a 5-well pad plan (FURY 2-1-6-5F 1H through 5H) with detailed pad construction and access road engineering, indicating a multi-well development campaign.
๐Ÿ“„ Throughout document, e.g., 'FURY 2-1-6-5F 1H, 2H, 3H, 4H and 5H' in operator letter and well paths sheets.
Reveals operator's intent for a significant, coordinated drilling program beyond a single well, creating a sustained service opportunity.
Relative General Oilfield Services

๐Ÿ’ก Operator Intent

๐Ÿ”ง Service Operator Relevance

Pad Construction & Earthwork
Detailed engineering plans (sheets C-1 to C-6, R-1 to R-7) with cut/fill quantities and specifications indicate imminent pad construction following regulatory pre-contact.
Directional Drilling & Liner Services
Permit condition mandates a specific production liner with wet shoe design for fracing out the shoe, creating a near-term, non-routine service requirement.
Waste Hauling & Disposal
Drill cuttings disposal is pre-contracted to 'Dishon Disposal (Select)', but services for closed-loop system management and hauling are required upon spud.